It’s the size of the drain being cleared drain snakes work for. Larger pipes like your toilet or shower drain can be tackled with drain augers. You can use an auger for lines in the 1-1/2′′ to 2-inch range, and the snake will cover them.
Table of Contents
Can a drain snake break a pipe?
Drain Snakes Can Damage Pipes While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are coated in zinc to prevent them from corroding. Drain snakes, on the other hand, are made of copper and are not coated with zinc.
If you have a drain snake in your home, make sure that it is properly installed. If your snake is in good condition, it should not be a problem. However, if you notice that the snake has been damaged, you should contact your local snake control company to see if they can repair the damage.
Can you snake a bathroom sink?
Unless it is a very large snake, you should be able to use a top snake for a bathroom sink drain. If you have a small snake, it may be best to use a bottom snake to drain the water from the sink.
If you do not have access to a snake that is large enough to do the job, then you will need to find a way to get the snake out of the drain. This will allow you to pull out your snake without having to worry about it getting stuck.
How do you unclog a sewer line with a snake?
The plunging may have done the trick if the high-water levels and slow drains abate. slowly twist a drain snake into the drain that you believe is blocked. Caution is needed, as drain snakes can break off in the process. Slowly turn the water back on. If you’re lucky, you’ll see a trickle of water coming out of the bottom of your drain.
How do you unclog a sewer in the basement?
A minor clog should clear after a few strong pumps with a plunger. Go for it if you put the plunger cup in the drain opening. The plunger did not do the trick. Baking soda can be poured down the drain and then chased with a small amount of vinegar. You’ll be surprised at how quickly the clogs clear.
Can a toilet auger be used on a sink?
If you’ve got a toilet that’s not working, you should get a toilet auger. They’re designed to deal with tough plumbing problems. If an auger is not an option, you should only use a drain snake. If you have a sink or bathtub that isn’t working, you should use the auger to fix it.
Can a toilet auger damage your toilet?
It can cause more harm than good because it can cause the porcelain in your toilet to crack or chip. It can cause pipe damage and lead to poisoning in children. If you have any concerns about the health effects of lead, talk to your doctor.
What happens if a toilet auger doesn’t work?
If the old clog is still attached, it might be because your auger isn’t clearing it. Make sure the old drain doesn’t get stuck in the new one. If you’re not sure, ask your local plumber. They’ll be able to tell you if your drain is clogged or not.
Can you snake a toilet?
A toilet snake is a type of drain snake made specifically for use on toilets. You use a toilet snake the same way that you use a drain snake, but toilet snakes are made specifically so that they don’t damage the walls of the toilet.
How do you get a snake past the trap?
The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. It will come out of the drain if you try to force it. If the auger is the right one for the job, you should gently and slowly push it. If you’re not sure what kind of snake you have, you can ask your local wildlife rehabilitator for advice.
How do you use a snake in the shower?
As you learn how to snake a shower drain, insert the snake into the drain until it hits the clog. The snake is in the right place when you start to feel resistance. If you don’t have a snake, you can use a piece of string or a rubber band. If you use the string, make sure it’s long enough to reach all the way to the bottom of the sink.
