To extend the cable down into the drain, turn the handle clockwise and then counter-clockwise until it reaches the bottom. If you have a sink with a drain plug, you may need to remove the plug first. If you don’t have one, use a small screwdriver to pry it off. The plug should come out easily, but if it doesn’t, it’s time to replace it.
Table of Contents
What happens if a toilet auger doesn’t work?
If the old clog is still attached, it might be because your auger isn’t clearing it. Make sure the old drain doesn’t get stuck in the new one. If you’re not sure, ask your local plumber. They’ll be able to tell you if your drain is clogged or not.
What is the difference between a snake and an auger?
It’s the size of the drain being cleared drain snakes work for smaller drain. Larger pipes like your toilet or shower drain can be tackled with drain augers. You can use an auger for lines in the range of 1/2′′ to 3/8′′ if you use the snake.
How do you unclog a drain if a snake doesn’t work?
Don’t use a drain cleaner if it doesn’t work because caustics in the pipes can be dangerous. In most cases, a rubber plunger can effectively remove the clog. A big cap or head is enough to cover the blocked drain.
If your drain is clogged, you may need to replace the drain pipe. You can do this by removing the old pipe and replacing it with the new pipe, or you can use an electrician to do it for you.
How long of a drain snake do I need?
The cable should be no smaller than 1/2 inch in size, with a minimum length of 75 to 100 feet, because they are designed for the toughest of clogs.
How long of a toilet auger do I need?
They can also be used to extend the length of a toilet seat. The auger is made of stainless steel and can be purchased at most home improvement stores. It is also available in a variety of colors.
Can a drain snake break a pipe?
Drain Snakes Can Damage Pipes While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are coated in zinc to prevent them from corroding. Drain snakes, on the other hand, are made of copper and are not coated with zinc.
If you have a drain snake in your home, make sure that it is properly installed. If your snake is in good condition, it should not be a problem. However, if you notice that the snake has been damaged, you should contact your local snake control company to see if they can repair the damage.
